Oscilloscope DSO150 With P6020 BNC

Specifications:
Maximum real-time sampling rate: 1 MSa/s
Analog bandwidth: 0 - 200 KHz
Sensitivity range: 5 – 20 mV/div
Maximum input voltage: 50 Vpk (1X probe)
Input impedance: 1M ohms/20pF
Accuracy: 12 bits
Record length: 1024 points
Coupling modes: DC / AC / GND
Time Base Range: 500s/Div – 10us / Div
Trigger modes: Auto, normal, and single
Trigger position: Center of buffer
Supply voltage: DC 9 V (8 – 10 V)
Current consumption: ~120 mA @ 9 V
Main board size: 94 x 65 mm (3.7 x 2.56 in)
Analog board size: 65 x 47 mm (2.56 x 1.85 in)
Screen size: 52 x 40 mm (2 x 1.57 in)
Package size: 14.5 x 10 x 3.7 cm (5.7 x 3.94 x 1.45 in)
Package weight: 179 grams (6.33 oz)

Key features:
Adopts ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen
Used for secondary development on the basis of this kit, for example, it can be changed to millivoltmeter, data loggers
Come with instructions, easy to install and operate
Auto/normal/single trigger modes, easy to capture the moment waveform
Available rising or falling edge trigger
Observable previous waveform before trigger (negative delay)
Can freeze waveform display at any time (HOLD function)
Waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values
Waveform storage function: Will not lose the waveform after powering off
Short-circuit and open-circuit detection: Can help the user find out the soldering error
TFT controller recognition function
The SMD has been soldered, more suitable for electronic beginners