-Co2-Laser-Machine-(High-Specs)-4-24x24.jpg){kind=small}
-1-24x24.jpg){kind=small}
-1-24x24.jpg){kind=small}
-1-24x24.jpg){kind=small}
-1-24x24.jpg){kind=small}
%202-24x24.jpg){kind=small}
%201-24x24.jpg){kind=small}
-2-24x24.jpg){kind=small}
-1-24x24.jpg){kind=small}
-1-24x24.jpg){kind=small}
Availability: In Stock
Features:The Laser Protective Lenses 18x2mm for Laser Welding Torches are glass replacement lenses used with hand-held laser welding torches and laser..
$10.25
Ex Tax:$10.25
Availability: In Stock
Features:The Laser Sealing Ring 20x18x1.2mm is a PTFE O-ring style seal used to create a tight seal between mating surfaces in compatible laser head s..
$3.75
Ex Tax:$3.75
Availability: In Stock
Features:The Spring-Loaded Sealing Ring 21x15x3mm is used for laser cutting head sealing applications. Its spring-loaded design helps keep the sealing..
$16.00
Ex Tax:$16.00
Availability: In Stock
Features:The Nozzle C is a copper welding nozzle used for external corner welding where no wire feeding is required. It is suitable for CNC and laser ..
$17.75
Ex Tax:$17.75
Brand: Leadshine
Availability: In Stock
Features: The Leadshine Stepper Motor Driver 3DM580S controls stepper motors using PUL/DIR or CW/CCW signals with up to 500kHz pulse input freque..
$75.00
Ex Tax:$75.00
Brand: Leadshine
Availability: In Stock
SpecificationsModel: DM1182Series: DMCommand Source: PUL&DIR, CW&CCWOperation Voltage (VDC): 70-130VACOutput Current (A, Peak): 8...
$185.00
Ex Tax:$185.00
Brand: Leadshine
Availability: In Stock
1. Electrical parameters:Input voltage: DC 24～50V inputOutput current: less than 4.2 amperesOutput current: 1.0A～4.2APower consumpti..
$57.00
Ex Tax:$57.00
Brand: Leadshine
Availability: In Stock
Features:The Leadshine Driver DM542-05 is a fully digital stepper motor driver based on advanced DSP control technology. It delivers smooth motion, op..
$57.00
Ex Tax:$57.00
Brand: Leadshine
Availability: In Stock
SpecificationsCan drive 4, 6 and 8-wire two-phase stepping motorFor Nema23 Nema34 Nema42 Stepper MotorVoltage input: 18-80VACMaximum current: 7.2A,res..
$80.00
Ex Tax:$80.00
Brand: Leadshine
Availability: In Stock
Features:The Leadshine Stepper Motor 86CM85 is a NEMA 34 two-phase motor with 8.5 N·m holding torque and 6A current. Built with premium bearings and s..
$90.00
Ex Tax:$90.00
Availability: In Stock
$26.00
Ex Tax:$26.00
Availability: In Stock
Parameters:Lihuiyu M2 Nano Mother Main Board Laser Control System..
$37.00
Ex Tax:$37.00
Availability: In Stock
Parameters:Lihuiyu M2 Nano Screen Laser Control System..
$26.00
Ex Tax:$26.00
Availability: In Stock
Parameters:Lihuiyu M2 Nano Screen Laser Control System..
$8.00
Ex Tax:$8.00
Availability: In Stock
Features:The M3 Nano laser controller board is an upgraded, high-performance mainboard for CO₂ laser engravers, such as the 3020, 4030, and 6040 serie..
$75.00
Ex Tax:$75.00
Out Of Stock
-1-350x350.jpg "Limit Switch 3 Pins - 16A (1E4-T125)")
-2-350x350.jpg "Limit Switch 3 Pins - 16A (1E4-T125)")
Out Of Stock
Availability: Out Of Stock
Features:The 12 V electric linear actuator provides smooth and precise motion with a speed of 20 mm/s and a strong 50 kg force. Built with durable alu..
$65.00
Ex Tax:$65.00
Availability: In Stock
Features:The SCS12UU is a compact linear bearing block designed for 12mm shafts, commonly used in CNC machines, 3D printers, and automation systems. I..
$3.00
Ex Tax:$3.00-350x350.jpg "Linear Rail Guide MGN12 (67cm)")
Out Of Stock
Availability: Out Of Stock
Specification:Linear Motion Rail Guide MGN12 (1pc Rail+ 1pc Slide Block)Rail Length: 67cmRail Height: 12mm..
$60.00
Ex Tax:$60.00
Out Of Stock
Availability: Out Of Stock
Features:The MGN12 linear rail kit delivers smooth and precise linear motion with excellent load capacity. Made from hardened stainless steel, it ensu..
$25.00
Ex Tax:$25.00
Availability: In Stock
Features:The SK12 Linear Shaft Support is a compact and durable mount designed for 12mm linear shafts in precision motion systems. It offers firm shaf..
$1.75
Ex Tax:$1.75
Out Of Stock
Availability: Out Of Stock
Features:The Linear Shaft Support - SK8 8mm SH8A is used to support hard chrome plated rods in CNC routers, CNC engraving machines, 3D printing machin..
$1.50
Ex Tax:$1.50
Availability: In Stock
Specification:Item Type: Locking SpringMaterial: Steel (Nickel Plated)Color: Silver ToneSize: d1.0 * D4.0 * L8mmSteel Wire Diameter: 1mmInner Spring D..
$0.10
Ex Tax:$0.10