CNC

Specifications:Cores: 8Insulation: PVCThickness: 0.33mm2 - 22AWGPrice per meter..

Features:This industrial 220V 550W exhaust fan delivers strong wind pressure and large air volume with low noise performance, making it ideal for CO2 ..

Specification:Power: 750 WVoltage: 220 VFrequency: 50 HzMaximum pressure 1.9 Kpa.Discharge 20 m3 / min.Unwanted sound: 90dB...

Features: The DX5 Ink Damper helps control ink flow, filter small particles, and remove air before ink reaches the printhead. It is used in Rolan..

Features:The Ink Pipes 8 Rows (3x2mm/4x3mm/5x3mm) are transparent PP ink tubes used for printer ink supply systems. They are suitable for solvent ink,..

Model: LW26GSType: 25AColor: yellow + blueMaterial: plasticSize: 64x64mm..

Name: Fiber Marking CardModel: FBLI-B-LV4AWith Axis Control, for rotary controlScope of application: Q-switched fiber laser, carbon dioxide laser, ult..

Features:The LA38 Emergency Stop Button Switch 22mm 10A is a heavy duty self locking mushroom push button designed for industrial emergency stop appli..

Features:The Cutting Nozzle is a copper nozzle used for cutting applications with CNC and laser machines. It has an M16 thread and is used where a ded..

Features:The Laser Protective Lenses 18x2mm for Laser Welding Torches are glass replacement lenses used with hand-held laser welding torches and laser..

Features:The Laser Sealing Ring 20x18x1.2mm is a PTFE O-ring style seal used to create a tight seal between mating surfaces in compatible laser head s..

Features:The Spring-Loaded Sealing Ring 21x15x3mm is used for laser cutting head sealing applications. Its spring-loaded design helps keep the sealing..

Features:The Nozzle C is a copper welding nozzle used for external corner welding where no wire feeding is required. It is suitable for CNC and laser ..

Features: The Leadshine Stepper Motor Driver 3DM580S controls stepper motors using PUL/DIR or CW/CCW signals with up to 500kHz pulse input freque..

SpecificationsModel: DM1182Series: DMCommand Source: PUL&DIR,   CW&CCWOperation Voltage (VDC): 70-130VACOutput Current (A, Peak): 8...

1. Electrical parameters:Input voltage:  DC 24～50V inputOutput current:  less than 4.2 amperesOutput current:  1.0A～4.2APower consumpti..

Features:The Leadshine Driver DM542-05 is a fully digital stepper motor driver based on advanced DSP control technology. It delivers smooth motion, op..

SpecificationsCan drive 4, 6 and 8-wire two-phase stepping motorFor Nema23 Nema34 Nema42 Stepper MotorVoltage input: 18-80VACMaximum current: 7.2A,res..

Features:The Leadshine Stepper Motor 86CM85 is a NEMA 34 two-phase motor with 8.5 N·m holding torque and 6A current. Built with premium bearings and s..