Arduino MP3 Music Shield VS1053

Description:
The VS1053 is a great MP3 decoder, it is capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCMand user-loadable Ogg Vorbis,can drive 30 ohm headphones with no based on VS1053B from VLSI. For the best headphone listening experience, the VS1053 includes Ear Speaker spatial procerssing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all majorformats, VS1053 is capable of recording in Ogg Vorbis files. With the SD card slot on the other side of the board, you can play mp3 files from SD card using this shield. It is easily to drop it inyour project or make a mp3 player using your Arduino.

Features:
- Can play a variety of music formats, support for OGG encoding real
- time recording
- SPI interface, the control signal lines are led out
- A headphone and stereo output
- A microphone for recording
- A line in input interface
- Power indicator
- 3.3V and 2.8V of LDO chip AMS
- 1117 on board, provides up to 800mA current
- A single power supply: +5 VDC
- 12.288 MHz crystal
- SD card slot Decodes formats
- Ogg Vorbis
- MP3 = MPEG 1 & 2 audio layer III (CBR+VBR+ABR)
- MP1 & MP2 = MPEG 1 & 2 audio layers I & II optional
- MPEG4 / 2 AAC
- LC (+PNS), HE
- AAC v2 (Level 3) (SBR + PS)
- WMA4.0/4.1/7/8/9 all profiles (5-384 kbps)
- FLAC lossless audio with software plugin (up to 24 bits, 48 kHz)
- WAV (PCM + IMA ADPCM)
- General MIDI 1 / SP-MIDI format 0

Encodes formats from Mic/line
- Ogg Vorbis with software plugin
- IMA ADPCM
- 16
- bit PCM