-1-24x24.jpg){kind=small}
-Co2-Laser-Machine-(High-Specs)-4-24x24.jpg){kind=small}
-1-24x24.jpg){kind=small}
-1-24x24.jpg){kind=small}
-1-24x24.jpg){kind=small}
%202-24x24.jpg){kind=small}
%201-24x24.jpg){kind=small}
-2-24x24.jpg){kind=small}
-1-24x24.jpg){kind=small}
-1-24x24.jpg){kind=small}
Brand: Leadshine
Availability: In Stock
SpecificationsModel: DM1182Series: DMCommand Source: PUL&DIR, CW&CCWOperation Voltage (VDC): 70-130VACOutput Current (A, Peak): 8...
$185.00
Ex Tax:$185.00
Brand: Leadshine
Availability: In Stock
1. Electrical parameters:Input voltage: DC 24～50V inputOutput current: less than 4.2 amperesOutput current: 1.0A～4.2APower consumpti..
$57.00
Ex Tax:$57.00
Brand: Leadshine
Availability: In Stock
SpecificationsCan drive 4, 6 and 8-wire two-phase stepping motorFor Nema23 Nema34 Nema42 Stepper MotorVoltage input: 18-80VACMaximum current: 7.2A,res..
$86.00
Ex Tax:$86.00
New
Availability: In Stock
Features:The M3 Nano laser controller board is an upgraded, high-performance mainboard for CO₂ laser engravers, such as the 3020, 4030, and 6040 serie..
$75.00
Ex Tax:$75.00
Availability: In Stock
Description:MACH3 Interface Board CNC 5 Axis with Optocoupler latest upgrade 5 axis breakout board is specially designed for the CNC stepper/servo dri..
$10.00
Ex Tax:$10.00
Availability: In Stock
Description:1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;2. Maximum step-pulse frequency is 100KHz,which i..
$27.50
Ex Tax:$27.50
Brand: MASSO
Availability: In Stock
A simple and standalone CNC Controller with fully integrated hardware and software specially designed to run CNC machines independently of a PC. No ne..
$2,100.00
Ex Tax:$2,100.00
Out Of Stock
Availability: Out Of Stock
Specification: – Model: NVUM USB MACH3 Card– Can control 4pcs stepper motor– with 12 channel programmable input port,can set it for emergency function..
$95.00
Ex Tax:$95.00
Availability: In Stock
DC 5-30V Micro USB 5V Power Independent PWM Generator 2 Channel Dual Way Digital LED Duty Cycle Pulse Frequency Board ModuleModule highlights:Two inde..
$2.50
Ex Tax:$2.50
Availability: In Stock
Features:CCPM Servo Consistency Master / Servo testerThe device also can be used as a signal generator for electric speed controller (ESC), then you c..
$3.25
Ex Tax:$3.25
Out Of Stock
Availability: Out Of Stock
Two-phase hybrid stepping motor dynamic voltage 12 to 48V, the current is less than 5A outer diameter of 35 to 86 mm. This drive using the drive's cur..
$27.00
Ex Tax:$27.00
Availability: In Stock
Specifications:Stepper Motor Driver Filter With Dupont Line For 3D Printer A4988 DRV8825 Filter Size: 40*30mmDupont Line Length: 115mm..
$4.25
Ex Tax:$4.25