Motors, Servos & Actuators

Specification:Operating voltage: 4.8 - 6.8VOperating speed ( 5.0V ): 0.14 sec/60 degreeOperating speed ( 6.8V ): 0.12 sec/60 degreeStall torque ( 5.0V..

Specifications:MG90S Micro Servo Motor, updated SG90 serve motor.Dimension: 22.5 x 12 x 35.5 mm approx.Weight: 13.4 gStall Torque: 2.0kg/cm(4.8V)Opera..

Description:Item Name: Servo Motor MG995 13KgItem No.: MG995Dimension: 40mm x 19mm x 43mmWeight: 56gOperating Speed: 0.17sec / 60 degrees (4.8V no loa..

Description:Item Name: Servo Motor MG996 13KgItem No.: MG996Dimension: 40mm x 19mm x 43mmWeight: 56gOperating Speed: 0.17sec / 60 degrees (4.8V no loa..

Description:Size : 30mm x 30mm x 12mmWeight : 9gOperating Speed (4.8V no load): 0.12sec/60 degreesStall torque: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz..

Features:CCPM Servo Consistency Master / Servo testerThe device also can be used as a signal generator for electric speed controller (ESC), then you c..

Voltage: 5V. Diameter: 28mm Step Angle: 5.625 x 1 / 64. Reduction Ratio: 1 / 64. 5 Lines 4 phases can be driven by ordinary ULN2003 chip...

Feature:This module is a pulse generation module, supply the control signal to stepper driver.To control the stepper motor, it must be equipped with a..

Introduction:The upgraded version of TB6600 is a driver suitable for 57/42 type two-phase hybrid stepping motor with phase current below 4.0A.Set 7 ki..

Two-phase hybrid stepping motor dynamic voltage 12 to 48V, the current is less than 5A outer diameter of 35 to 86 mm. This drive using the drive's cur..

A, B, C, D four-phases LED indicates the status of the stepper motor...