Stock: In Stock
Description:Item Name: Servo Motor MG996 13KgItem No.: MG996Dimension: 40mm x 19mm x 43mmWeight: 56gOperating Speed: 0.17sec / 60 degrees (4.8V no loa..
from
$7.00
Ex Tax:$7.00
Stock: In Stock
Description:Size : 30mm x 30mm x 12mmWeight : 9gOperating Speed (4.8V no load): 0.12sec/60 degreesStall torque: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz..
from
$2.50
Ex Tax:$2.50
Stock: In Stock
Features:CCPM Servo Consistency Master / Servo testerThe device also can be used as a signal generator for electric speed controller (ESC), then you c..
from
$3.25
Ex Tax:$3.25
Stock: In Stock
Voltage: 5V. Diameter: 28mm Step Angle: 5.625 x 1 / 64. Reduction Ratio: 1 / 64. 5 Lines 4 phases can be driven by ordinary ULN2003 chip...
from
$2.00
Ex Tax:$2.00
Out Of Stock
Stock: Out Of Stock
Two-phase hybrid stepping motor dynamic voltage 12 to 48V, the current is less than 5A outer diameter of 35 to 86 mm. This drive using the drive's cur..
from
$27.00
Ex Tax:$27.00
Stock: In Stock
Feature:This module is a pulse generation module, supply the control signal to stepper driver.To control the stepper motor, it must be equipped with a..
from
$5.50
Ex Tax:$5.50
Stock: In Stock
Introduction:The upgraded version of TB6600 is a driver suitable for 57/42 type two-phase hybrid stepping motor with phase current below 4.0A.Set 7 ki..
from
$12.00
Ex Tax:$12.00
Stock: In Stock
Two-phase hybrid stepping motor dynamic voltage 12 to 48V, the current is less than 5A outer diameter of 35 to 86 mm. This drive using the drive's cur..
from
$17.00
Ex Tax:$17.00
Stock: In Stock
A, B, C, D four-phases LED indicates the status of the stepper motor...
from
$1.50
Ex Tax:$1.50
Stock: In Stock
Specification:Model Number: 17HD48002H-22BCurrent / Phase: 1.7APhase: 2Size: 42*42*48mmStep Angle(degrees): 1.8Holding Torque: 0.59 N.mShaft Diameter:..
from
$16.50
Ex Tax:$16.50
Stock: In Stock
Specification:Model Number: 42HD40/17HD40Current / Phase: 1.7APhase: 2Size: 42*42*40mmStep Angle(degrees): 1.8Holding Torque: 0.4 N.mShaft Diameter: 5..
from
$12.00
Ex Tax:$12.00
Stock: In Stock
Specification:Model: 57HD6013-03, 76mm Long, 3A with 800mm CableRotor Inertia: 480 g.cm2Step Angle: 1.8°Motor Length: 76mmHolding Torque: 1.8N.mRated ..
from
$36.00
Ex Tax:$36.00